You can set
up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
Press
the Menu button.
Select
the Network menu and press
Enter.
Select
Network Configuration and press
Enter.
Select
the Mail menu and press Enter.
Turn on
Mail Notification.
Enter
the IP address for the SMTP Server
option.
Note: Do not use
these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Select a
number for the SMTP server Port
Number, from 1 to 65535 (default is 25).
Choose
an Address field, enter the e-mail
address, and select the alerts you want to receive there. Repeat
for up to three addresses.
Note: Your e-mail
address can be up to 64 alphanumeric characters long. You can only
enter 32 characters via the projector menu. To enter more than 32
characters, use the web configuration page to enter the e-mail
address.
When you
finish selecting settings, select Complete and follow the on-screen instructions
to save your settings and exit the menus.
Note: If a
critical problem causes a projector to shut down, you may not
receive an e-mail alert.
