Network
administrators can install monitoring software on network computers
so they can monitor projectors. If your network uses this software,
you can set up the projector for monitoring.
Press
the Menu button.
Select
the Network menu and press
Enter.
Select
Network Configuration and press
Enter.
Select the Others menu
and press Enter.
If your
network environment uses an AMX controller, turn on the
AMX Device Discovery setting to
allow the projector to be detected.
If your network environment uses a
Control4 or Control4 SDDP controller, turn on the Control4 SDDP setting to allow the projector to
be detected (PowerLite Pro Cinema LS10000).
If you
are connecting to a network using Bonjour, turn on the Bonjour setting.
When you
finish selecting settings, select Complete and follow the on-screen instructions
to save your settings and exit the menus.
