Using the WirelessHD Picture in Picture Feature

If you have connected multiple video sources to the WirelessHD transmitter, you can use the transmitter's Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time. This feature is independent of any Picture-in-Picture capabilities of your projector.
  1. Make sure that the WirelessHD source is selected.
  2. Point the remote at the WirelessHD transmitter and press the P-in-P button in the WiHD Transmitter section of the remote control.
  3. Do the following to control the P-in-P display:
    • Press the Input button on the remote control or the WirelessHD transmitter to change the video source displayed in the sub-screen. Keep pressing the button to cycle through the connected video devices.
    • Press the Output button on the remote control or the WirelessHD transmitter to change the position of the sub-screen. The screen moves counterclockwise from corner to corner each time you press the Output button.
    • Press and hold the P-in-P button on the remote control to switch the sources shown in the main display and the sub-screen.
  4. When you are finished using Picture in Picture, press the WirelessHD P-in-P button on the remote control to resume normal projection.
Parent topic: Using WirelessHD