Make sure
you have new ink bottles handy and have read the ink safety
precautions before you begin.
You can continue to use the product even if one or more ink tanks are not filled all the way. However, to keep your product operating at its best, fill all the ink tanks up to the top line.
Caution:
Wear plastic gloves while refilling the ink
tanks to avoid staining your hands.
Note: Your product
may differ from the illustrations in this section, but the
instructions are the same.
- Make
sure the
power light is on, but not
flashing. - Unhook
the ink tank unit from the product and lay it down.
Note: Do not pull on the ink tubes.
- Open the
ink tank unit cover, then remove the ink tank’s cap.
Note: Make sure the color of the ink tank matches the ink color you want to refill, and only remove the cap from that ink tank. Be careful not to spill any ink.
- Snap off
the tip of the bottle cap, but do not dispose of the bottle cap tip
so you can use it to seal the bottle cap later, if necessary. Then
remove the cap, remove the seal from the bottle, and replace the
cap on the bottle.
Note: Make sure the color of the ink bottle matches the ink color you want to refill.Caution:
- Refill the ink tank with the correct color ink up to the upper line on the ink tank.
- If any ink remains in the ink bottle after filling the ink tank, place the bottle cap tip securely on the bottle cap and store the ink bottle upright for later use.
- Place the cap securely on the ink tank.
- Close the ink tank unit cover.
- Hook the ink tank unit onto the product.
