If you see
ink on the back of a printout, you can clean the paper guide
rollers to remove any excess ink. If paper does not feed correctly
from the rear paper feed slot, you can use a cleaning sheet to
clean the rollers.
Do one of the following:
are smeared or scuffed, load plain paper in the paper source that
you want to clean in this size: A3
(11.7 × 16.5 inches
[297 × 420 mm])
If paper does
not feed correctly from the rear paper feed slot, load the cleaning
sheet that comes with genuine Epson paper in the rear paper feed
Press the arrow buttons to select Menu and press the OK
Select Maintenance and
press the OK button. You see this screen:
Select Paper Guide
Cleaning and press the OK button.
Select the paper source you want to clean and press the
Press the up arrow button.
If you are cleaning the paper guides, repeat as necessary
until the paper comes out clean. If you are using a cleaning sheet,
repeat these steps up to 3 times.
Note: If the
paper is not clean after cleaning several times, try cleaning the
other paper sources.