Controlling a Networked Projector Using
Crestron RoomView
Once you
have set up your projector to use Crestron RoomView, you can
control and monitor projection using a compatible web
browser.
Start
your web browser on a computer connected to the
network.
Type the
projector's IP address into the browser's address box and press the
computer's Enter key. You see
this screen:
Select
the input source that you want to control in the Sources List box.
You can scroll through available sources using the up and down
arrows in the box.
To
control projection remotely, click the on-screen buttons that
correspond to the projector's remote control buttons. You can
scroll through button options at the bottom of the screen.
Note: These
on-screen buttons do not directly correspond to the projector's
remote control buttons:
OK acts as the Enter button
Menu displays the projector's menu
To view
information about the projector, click the Info tab.
To
change projector, Crestron, and password settings, click the
Tools tab, select settings on the
displayed screen, and click Send.
When you
finish selecting settings, click Exit to exit the program.
