If the pen position is not the same as the mouse
pointer, try the following solutions:
-
Make sure
you have calibrated the system. Try manual calibration.
-
Make sure
the cable cover is in place to keep cables from blocking the
signal.
-
Try
adjusting the pen operation area.
-
If you use
the E-Zoom + button on the remote
control to enlarge the image, the pen position is not accurate.
When you return the image to the original size, the position should
be correct.
-
In PC
Interactive mode (in the Extended menu), turn off Auto Adjust Pen Area and select Manual Adj. Pen Area.
-
Try
changing the computer's resolution to 1280 × 800.