The Touch Unit enables finger touch interactivity with your
projector (BrightLink 595Wi+). Do not connect it to
any other projectors or devices.
A built-in, high-power laser is emitted from the
laser diffusion ports on the back of the Touch Unit.
Follow these precautions when using the Touch Unit and finger
touch interactivity:
- Children
using finger touch interactivity should always be accompanied by an
adult.
- Never
disassemble or modify the Touch Unit.
- Do not look
into the laser diffusion ports on the back of the Touch Unit. The
laser can damage your eyes. Extra care should be taken when
children are present.
- Do not allow
the laser light from the Touch Unit to pass through or be reflected
by any optical devices, such as a magnifying glass or mirror. This
could cause personal injury or fire.
- Do not view
the laser light from the Touch Unit using an optical device such as
an eye loupe, magnifying glass, or microscope, especially within
2.75 inches (70 mm) of the laser diffusion ports. This could damage
your eyes.
- Unplug the
projector from the electrical outlet and refer all repairs to
qualified service personnel if any problems occur with the Touch
Unit.
The Touch Unit is a Class 1 laser product that
complies with IEC/EN60825-1:2007. The labels indicating the Class 1
laser product and warnings are located in the following areas on
the Touch Unit: