Setting Up Network Scanning

After manually configuring your scanner to connect to your network, you must set up the computer to connect to the scanner using the Epson Scan Settings utility. Your scanner must be turned on and connected to the network before you begin.
Note: The scanner powers off after 5 minutes of inactivity. If the scanner turns off during the procedure, you may need to repeat some of these steps.
Note: Make a note of the IP address or host name of the scanner so you can enter it in these steps.
  1. Do one of the following to start Epson Scan Settings:
    • Windows 10: Click > EPSON > EPSON Scan Settings.
    • Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings.
    • Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings.
    • Mac: Open the Applications folder, click Epson Software, and click EPSON Scan Settings.
  2. Select your scanner from the Select Scanner list.
  3. Select the Network setting and click Add. You see a screen like this:


  4. Do one of the following:
    • Under Search for addresses, select the IP address of your scanner, and click OK.
    • Select the Enter address setting, type in the IP address or host name of your scanner, and click OK.
  5. Click the Test button to check the connection. You see a confirmation message.
  6. Click OK to save your settings and close Epson Scan Settings.