Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting | Options | Description |
---|---|---|
3D Setup | On
Off |
Enables passive 3D images when projecting from 2 projectors |
Auto Setup | On
Off |
Automatically optimizes image quality from an analog RGB computer connection (when On) |
Resolution | Auto
Normal Wide Manual |
Sets the input signal resolution from an analog
RGB computer connection
Auto: detects the resolution automatically Normal: for 4:3 or 5:4 screens Wide: for widescreen Manual: lets you specify a resolution |
Tracking | Varying levels available | Adjusts signal to eliminate vertical stripes in images from an analog RGB computer connection |
Sync. | Varying levels available | Adjusts signal to eliminate fuzziness or flickering in images from an analog RGB computer connection |
Position | Up, down, left, right | Adjusts the image location on the screen |
Progressive | Off
Video Film/Auto |
Sets whether to convert
interlaced-to-progressive signals for certain video image types
Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation |
Frame
Interpolation
(PowerLite Pro Z9750UNL/Z9870UNL/ Z10000UNL/Z10005UNL) |
Off
Low Normal High |
Smooths fast moving video by comparing consecutive frames and inserting an intermediate frame between them |
Super-resolution | Varying levels available | Reduces edge blurring that may occur when image is scaled up to fit the resolution of the image signal |
Noise Reduction | Off
NR1 NR2 |
Reduces flickering in analog images in two levels |
Mosquito NR | On
Off |
Reduces the noise or artifacts seen around the edges of objects that is caused by the decompression of MPEG video |
Video Range | Auto
Normal Expanded |
Sets the video range to match the setting of the device connected to the HDMI, HDBaseT, and SDI (PowerLite Pro Z9870UNL/Z10000UNL/ Z10005UNL) input ports |
Input Signal | Auto
RGB Component |
Specifies the signal type from input sources
connected to computer ports
Auto: detects signals automatically RGB: corrects color for computer/RGB video inputs Component: corrects color for component video inputs |
Video Signal | Auto
Various video standards |
Specifies the signal type from the input
sources connected to the video ports
Auto: detects signals automatically |
Aspect | See the list of available aspect ratios | Sets the aspect ratio (width-to-height ratio) for the selected input source |
Scale | Various scale options | When using multiple projectors to project one image, adjusts the scale of the image displayed by each projector |
Overscan | Auto
Off 4% 8% |
Changes the projected image ratio to make the edges visible by a selectable percentage or automatically |
Image Processing | Fast
Fine |
Adjusts how images are processed
Fast: displays images quicker Fine: displays images in higher quality |