You can
print photos on a variety of paper types and sizes. You can load photo paper in these sizes: 4 × 6 inches (102 × 152 mm),
5 × 7 inches
(127 × 178 mm), or 8 × 10 inches
(203 × 254 mm).
Close the paper stopper and output tray, if
necessary.
Pull out the paper cassette.
Slide the edge guides outward.
Slide the edge guide to your paper size.
Load photo paper, printable side down, against the edge
guide as shown.
Note: Make
sure the paper is loaded against the edge guide and not sticking
out from the end of the cassette.
Slide the edge guides against the paper, but not too
tightly.
Caution:
To prevent paper feeding problems, make
sure the paper fits beneath the top edges of the guides and do not
load too much paper in the cassette.
Gently insert the paper
cassette.
Note: The
paper may slide forward slightly as you insert the cassette. This
is normal.
When prompted by the product's LCD screen, select the size
and type of the paper you just loaded and press
the OK
button.
Extend the output tray and open the paper stopper.
Note: If you
are using legal-size or longer paper, do not open the paper
stopper. Do not remove or insert the paper cassette during
printing.
Always follow these paper loading guidelines:
Load only the
recommended number of sheets.
Load paper short
edge first, no matter which way your photo faces.
Load the
printable side facedown.
Do not load paper
above the arrow mark inside the edge guide.
Check the paper
package for any additional loading instructions.