- Press the Menu button on the remote control.
- Select the Extended menu and press Enter.
- Select Whiteboard Settings and press Enter.
- Select Mail and press Enter.
- Select
the following options for emailing as necessary:
- SMTP Server let you enter the IP
address or host name for the mail server. You can enter up to 63
alphanumeric characters. If you specify a host name, you must
configure a DNS server.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to 255.255.255.255.
- Authentication lets you set the type of authentication expected by the mail server
- Port Number lets you enter a port number for the SMTP server. The default port is 25.
- User name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric characters.
- Password lets you enter a password for the mail server. You can enter up to 64 alphanumeric characters.
- From lets you enter the email address to be displayed to the sender. You can enter up to 64 alphanumeric characters.
- Default e-mail address lets you enter an optional address for testing. You can enter up to 64 alphanumeric characters.
- Send a test e-mail connects to the SMTP server and sends a test email to the address you set as the default.
Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote control to highlight numbers or characters and press Enter to select them. You cannot use spaces in the User Name and Password fields. You can not use spaces or the following symbols: " * + , : ; < = > ? [ ] | in the Reply to and From fields. - SMTP Server let you enter the IP
address or host name for the mail server. You can enter up to 63
alphanumeric characters. If you specify a host name, you must
configure a DNS server.
- When you finish selecting settings, select Setup Complete and follow the on-screen instructions to save your settings and exit the menus.
