Setting Up Projector Network E-Mail Alerts
You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
Press the
Menu
button.
Select the
Network
menu and press
Enter
.
Select
Network Configuration
and press
Enter
.
Select the
Administrator Settings
menu and press
Enter
, then select
Mail Notification
and press
Enter
.
Enter the IP address for the
SMTP Server
option.
Note:
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
Select a number for the SMTP server
Port Number
, from 1 to 65535 (default is 25).
Choose an
Email Address
field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses.
Note:
Your e-mail address can be up to 32 alphanumeric characters long.
When you finish selecting settings, select
Setup Complete
and follow the on-screen instructions to save your settings and exit the menus.
Note:
If a critical problem causes the projector to shut down, you may not receive an e-mail alert.
Network Projector E-mail Alert Messages
Parent topic:
Using the Projector on a Network
