Using Quick Wireless Connection (Windows Only)

You can use the Quick Wireless Connection USB Key to quickly connect the projector to a Windows computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note: The Quick Wireless Connection USB Key is not included with your projector.
  1. Turn on the projector.
  2. Connect the USB key to the projector's USB-A port.
    Note: If the control pad is connected to the projector, you can also connect the USB key to the USB-A port on the control pad, as shown:


    You see a projected message that the network information update is complete.
  3. Remove the USB key.
  4. Connect the USB key to a USB port on your computer or laptop.
    Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe, then select Allow on the next screen.
  5. Follow the on-screen instructions to install the Quick Wireless Connection driver.
    Note: If you see a Windows Firewall message, click Yes to disable the firewall.
    After a few minutes, your computer image is displayed by the projector. If it does not appear, press the Source Search button on your remote control and select the LAN source, or restart your computer.
  6. Run your presentation as necessary.
  7. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, then remove the USB key from your computer.
    Note: You may need to restart your computer to reactivate your wireless LAN connection.