Configuring a Product IP Address Using
EpsonNet Config - Ethernet
You can
configure the product's IP address using EpsonNet Config.
Turn on
the product.
Connect
the product to a network using an Ethernet cable.
Do one
of the following to start EpsonNet Config:
Windows 8.x: Navigate to the
Apps screen and select EpsonNet Config under EpsonNet.
Windows (other versions): Click
or Start, and select All
Programs or Programs. Select
EpsonNet and click EpsonNet Config.
OS X: Open the Applications folder, open the Epson Software folder, select EpsonNet, select
EpsonNet Config, and double-click the EpsonNet Config icon.
After a few moments, the program displays the connected
products.
Double-click the product you are
configuring.
Note: If several
products of the same model are connected, you can identify them by
their MAC address.
From the menu on the left, select
Network Interface, select
TCP/IP, and select Basic. You see a window like this:
Enter the product's IP address, Subnet
Mask, and Default Gateway
settings in the fields provided.
Note: To connect
the product to a secure network, enter a static IP address. You can
also configure the DNS settings by selecting DNS, and enter proxy settings by selecting
Internet from the TCP/IP menu.