If you cannot access Web Config on your product, try these
solutions:
- Make sure
your product is turned on and connected to your network using the
correct IP address. Verify connection using your product control
panel or print a network status sheet. See your product's
User's Guide for instructions.
- If you
selected High as the Encryption Strength setting in Web Config, your
browser must support AES (256-bit) or 3DES (168-bit) encryption.
Check your browser's encryption support or select a different
Encryption Strength option.
- If you are
using a proxy server with your product, configure the browser's
proxy settings as follows:
- Windows: Select Control Panel > Network and Internet > Internet Options > Connections > LAN
settings > Proxy server.
Select the setting that does not use the proxy server for local
addresses.
- OS X: Select System Preferences > Network > Advanced > Proxies. Register the local address under
Bypass proxy settings for these Hosts &
Domains. For example, 192.168.1.*: Local address
192.168.1.XXX, subnet mask 255.255.255.0.