Aligning the Print Head Using the Product Control Panel

You can align the print head using the control panel on your product.
  1. Make sure the CD/DVD tray is not inserted for printing.
  2. Load a few sheets of plain paper in the product.
  3. Press the  home button, if necessary.
  4. Press the arrow buttons to select Setup and press the OK button.
  5. Select Maintenance and press the OK button.

  6. Select Print Head Alignment and press the OK button.

  7. Press the  start button to print an alignment sheet.
    Note: Do not cancel printing while you are printing a head alignment pattern.
  8. Check the printed pattern and select the number representing the most solid printed pattern for each set on the LCD screen.

  9. Press the OK button when you are finished.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use