If you need
to store your product or transport it a long distance, prepare it
for transportation as described here.
Caution:
During transportation and storage, follow
these guidelines:
- Because the product is heavy, two or more people should lift and carry it using the hand position shown:
- Avoid tilting the product, positioning it vertically, or turning it upside down; otherwise ink may leak.
- Remove the ink packs before transportation as described here, but leave the maintenance box installed; otherwise ink may leak.
Note: Before
storing your product for a long period, replace low, expended, or
expired ink to help prevent the print head from drying out. Store
your product in a cool, dry place.
- Turn off the product.
- Remove all the paper from the product.
- Unplug the power cable.
- Disconnect any connected cables.
- Close the rear paper support and the output tray.
- Open the ink case.
- Press the handle on the ink pack. The ink pack pops out.
- Lift up the ink pack and remove it from the ink case.
- Push in the pop-out section and close the ink case.
- Follow the previous steps to remove the color ink packs on the other side of the product.
- Carefully transport the ink packs lying flat, with the ink
supply port facing up.
Caution:Do not drop or strike the ink packs; otherwise, ink may leak.
- Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Make sure the box adequately protects the product control panel.
