You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. The information displayed depends on the currently selected input source.
Note: The lamp
usage timer does not register any hours until you have used the
lamp for at least 10 hours. Available settings depend on the
current input source.
| Setting | Options | Description |
|---|---|---|
| Projector Info | Lamp Hours | Displays the number of hours (H) the lamp has been used in each Power Consumption mode; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon |
| Source | Displays the name of the port to which the current input source is connected | |
| Input Signal | Displays the input signal type setting of the current input source | |
| Resolution | Displays the resolution of the current input source | |
| Scan Mode | Displays the scan mode (progressive or interlaced) | |
| Refresh Rate | Displays the refresh rate of the current input source | |
| 3D Format | Displays the 3D format of the current input source | |
| Sync Info | Displays information that may be needed by a service technician | |
| Deep Color | Displays Deep Color information | |
| Video Signal | Displays the video signal format of the current input source | |
| Status | Displays information about projector problems that may be needed by a service technician | |
| Serial Number | Displays the projector's serial number | |
| Event ID | Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes | |
| Version | Main
Video Video2 |
Displays the firmware version of the projector |