Blue |
Blue |
Off |
Off |
Normal operation |
Blue |
Flashing blue |
Off |
Off |
Warming up; wait for an image to appear |
Shutting down; when the Status light stops
flashing, you can unplug the projector |
Off |
Off |
Off |
Off |
Standby or sleep mode |
Flashing blue |
Varies |
Off |
Flashing orange |
Projector is too hot
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects
-
Clean or
replace the air filter
-
Make sure
the environmental temperature is not too hot
|
Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off; leave
it turned off to cool down for about five minutes, then do the
following:
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects
-
Clean or
replace the air filter
-
If
operating the projector at high altitude, turn on High Altitude Mode
-
If the
problem persists, unplug the projector and contact Epson for
help
|
Off |
Flashing blue |
Orange |
Off |
Lamp has a problem
-
Check to
see if the lamp is burned out, broken, or installed incorrectly;
reseat or replace the lamp as necessary
-
Clean or
replace the air filter
-
If
operating the projector at high altitude, turn on High Altitude Mode
-
If the
problem persists, unplug the projector and contact Epson for
help
|
Flashing blue |
Varies |
Flashing orange |
Off |
Replace the lamp soon to avoid damage; do not
continue using the projector |
Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem; turn the
projector off, unplug it, and contact Epson for help |
Off |
Flashing blue |
Flashing orange |
Flashing orange |
Auto Iris error; turn the projector off, unplug
it, and contact Epson for help |
Off |
Flashing blue |
Orange |
Orange |
Power error; turn the projector off, unplug it,
and contact Epson for help |
Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error; turn the projector
off, unplug it, and contact Epson for help |