| 1 |
The  power
button (turns the transmitter on or off) |
| 2 |
Input button
(cycles through image sources) |
| 3 |
Output button
(cycles output signal between the projector and a display device
connected to the transmitter's Output port) |
| 4 |
Power switch (turns the transmitter on or
off) |
| 5 |
AC adapter port (connects the AC adapter) |
| 6 |
Optical (OUT) port
(connects to devices with an optical digital audio input port) |
| 7 |
HDMI (OUT) port
(connects to display devices such as a television) |
| 8 |
HDMI input ports (connect to your input devices;
HDMI/MHL port on the side of transmitter) |
| 9 |
3D glasses charging port (connects a USB cable to
charge the 3D glasses) |
| 10 |
Setup button (press
for 5 seconds to reset the transmitter's settings) |
| 11 |
power
light (lights green when transmitter is operating or turned on;
lights orange when the transmitter is on standby) |
| 12 |
WiHD light (lights orange when sending a wireless
signal to the projector) |
| 13 |
Link light (lights orange when connected to the
projector; flashes orange when searching for the projector or when
on standby) |
