If you have problems feeding paper, try these solutions:
- Place the
product on a flat surface.
- If the
battery is running low, connect the AC adapter.
- If paper
does not feed for printing, remove it. Then reload it in the rear
paper feed against the right side and beneath the tab. Slide the
edge guide against the edge of the paper.
- If multiple
pages feed at once, remove the paper, fan the edges to separate the
sheets, and reload it.
- If paper
jams when you print on both sides of the paper, try loading fewer
sheets.
- Make sure
your paper meets the specifications for your product.
- Make sure
the paper size and paper type settings on the control panel are
correct.
- For best
results, follow these guidelines:
- Use new,
smooth, high-quality paper that is not curled, creased, old, too
thin, or too thick.
- Load paper
in the rear paper feed printable side up.
- Follow any
special loading instructions that came with the paper.