Projector Information Display - Info Menu

You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note: The information displayed depends on the currently selected input source.


Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source.
Information item Description
Lamp Hours Displays the number of hours (H) the lamp has been used in each Power Consumption mode
Source Displays the name of the port to which the current input source is connected
Input Signal Displays the input signal type setting of the current input source
Resolution Displays the resolution of the current input source
Scan Mode Displays the scan mode (progressive or interlaced)
Refresh Rate Displays the refresh rate of the current input source
3D Format Displays the 3D format of the current input source
Sync Info Displays information that may be needed by a service technician
Deep Color Displays Deep Color information
Status Displays information about projector problems that may be needed by a service technician
Serial Number Displays the projector's serial number
Version Displays the firmware version of the projector
Related tasks
Replacing the Lamp
Resetting the Lamp Timer
Related references
Optional Equipment and Replacement Parts