You can save
the projector settings you want to transfer to a USB flash drive.
Note: Use an empty
flash drive. If the drive contains other files, the transfer may
not complete correctly.
Turn off
the projector and unplug the power cord from the projector's power
inlet.
Insert
the flash drive into the USB-A port.
Note: Connect the
flash drive directly to the projector. Do not use a hub.
Press
and hold the Esc button on the
control panel or remote control as you connect the power cord to
the projector's power inlet.
When the power, Status, Lamp, and Temp lights turn on,
release the Esc
button. The lights flash to indicate that settings
are transferring to the flash drive. When the lights stop flashing,
the power light turns blue and the projector enters
standby mode.
Caution:
Do not unplug the power cord or remove the
flash drive while the lights are flashing. This could damage the
projector.
Once the
projector enters standby mode, remove the flash drive.