You can set
up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
the Menu button.
the Network menu and press
Network Configuration and press
the Mail menu and press Enter.
the IP address for the SMTP Server
enter the IP address using the numeric keys on the remote control,
press and hold the Num
button. Do not use these addresses: 127.x.x.x or 184.108.40.206
through 255.255.255.255 (where x is a number from 0 to
number for the SMTP server Port
Number, from 1 to 65535 (default is 25).
an Address field, enter the e-mail
address, and select the alerts you want to receive there. Repeat
for up to three addresses.
Note: Your e-mail
address can be up to 32 alphanumeric characters long.
finish selecting settings, select Complete and follow the on-screen instructions
to save your settings and exit the menus.
Note: If a
critical problem causes a projector to shut down, you may not
receive an e-mail alert.