You can
place originals directly on the scanner glass while the scanner
stand is extended.
Caution:
Do not place heavy objects on the scanner
glass and do not press on the glass with too much force, or it may
damage the scanner. Do not leave photos on the scanner glass for an
extended period, or they may stick to the glass.
Note: You cannot
place large or thick documents when the scanner is in a standing
position.
- Open the scanner cover.
- Place
your original facedown on the scanner glass with the top edge
facing as shown. Slide the original to the edges of the indicated
corner.
Note: The edges of your original may be cropped by 0.1 inch (2.5 mm) from the left side and top edges. If you are scanning in Full Auto mode or using thumbnail preview in another mode in Epson Scan, the edges of your original may be cropped by about 0.24 inch (6 mm) from the top and side edges.
- Close the scanner cover gently and hold it to keep your original in place.
