| E-01 |
A fatal printer error has occurred. Turn the product
off and then back on again. If the error continues, check for a
paper jam. If there is no paper jam, contact Epson for
support. |
| E-02 |
A fatal scanner error has occurred. Turn the product
off and then back on again. If the error continues, contact Epson
for support. |
| E-11 |
An ink pad needs service. The ink pad is at the end of
its service life. Turn off the product and contact Epson for
support. |
| W-01 |
A paper jam has occurred. Remove the jammed paper, then
press the button displayed on the LCD screen. You may also need to
turn the printer off and on again. |
| W-11 |
An ink pad is nearing the end of its service life.
Contact Epson for support. (To continue printing, press the
 start button.) |
| W-12 |
Ink cartridges are installed incorrectly. Press down
each of the ink cartridges gently to make sure they are installed
correctly. |
| W-13 |
An ink cartridge indicated on the LCD screen is not
recognized. Replace the ink cartridge. Epson recommends using
genuine Epson ink cartridges. |
| I-22 |
To establish a wireless connection using an access
point, press the button on the access point or click the button on
the access point's wireless settings screen displayed on your
computer screen. |
| I-23 |
Enter the PIN code displayed on the LCD screen into the
access point or computer within two minutes. If you wait longer
than two minutes, a time-out error occurs, the code changes, and
you must enter a new code. |
| I-31 |
To make wireless connection settings from your
computer, insert your product CD into your computer and follow the
on-screen instructions. |
| I-41 |
The Paper Configuration setting must be turned on to
use AirPrint. |
| I-60 |
Your computer may not support WSD (Web Services for
Devices). The Scan to PC (WSD) function is available only for
computers running English versions of Windows 8.x, Windows 7, or
Windows Vista. |
| Recovery mode |
An error has occurred during firmware updating. Connect
your product using a USB cable and try updating the firmware again.
If you still receive this error message, contact Epson for
support. |