Turning On Auto Iris

In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project.
Note: Auto Iris is disabled if Edge Blending is set to On.
  1. Turn on the projector and switch to the image source you want to use.
  2. Press the Menu button.
  3. Select the Image menu and press Enter.

  4. Select the Auto Iris setting and select High Speed.
    Note: Select Normal for quieter performance. You can turn Auto Iris on or off for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting.
  5. Press Menu or Esc to exit the menus.