Focusing the Image with the Optional Short
Throw Lens
If
you installed the optional short throw lens (ELPLU01) and used the
lens shift option to shift the lens, you can focus the image using
the distortion and focus rings.
Turn on the projector and display an image.
Note: You can
display a pattern to aid in adjusting the projected image using the
Settings menu.
Note: You can also
display a pattern to aid in adjusting the projected image using the
Test Pattern button on the remote
control.
Carefully rotate the distortion ring all the way
counter-clockwise.
Note: Be careful
not to shift the short throw lens when adjusting it to prevent the
projected image from shifting.
Support the front of the lens with one hand and use the other
to carefully rotate the focus ring until the center of the image is
focused.
Rotate the distortion ring until the edges of the image are
also focused.
Rotate the focus ring again to focus the entire screen
image.
If the center of the image out of focus, rotate the
distortion ring again to bring the area into focus.