You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Note: The lamp
usage timer does not register any hours until you have used the
lamp for at least 10 hours. Available settings depend on the
current input source.
| Setting | Options | Description |
|---|---|---|
| Projector Info | Lamp Hours | Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon |
| Source | Displays the name of the port to which the current input source is connected | |
| Input Signal | Displays the input signal setting of the current input source | |
| Resolution | Displays the resolution of the current input source | |
| Video Signal | Displays the video signal format of the current input source | |
| Refresh Rate | Displays the refresh rate of the current input source | |
| Sync Info | Displays information that may be needed by a service technician | |
| Status | Displays information about projector problems that may be needed by a service technician | |
| Serial Number | Displays the projector's serial number | |
| HDBaseT Signal Quality | Displays the image signal information from the HDBaseT port | |
| Version | Main
Main2 Video |
Displays the projector's firmware information |