Setting | Options | Description |
---|---|---|
Wireless LAN Power | On
Off |
Turns wireless LAN support on and off |
Wi-Fi Protected Setup | To Setup Wizard | Select To Setup Wizard to start the WPS Connection Setup utility |
Wireless LAN System | 802.11b/g
802.11b/g/n |
Sets the type of wireless LAN system the projector is connecting to |
Connection Mode | Quick
Advanced |
Selects the type of wireless connection:
Quick: lets you quickly connect to one computer or use the optional Quick Wireless Connection USB key to connect If you set the SSID Auto Setting setting to On, the projector becomes an easy access point; if you set it to Off, the network is created in Ad hoc mode. Advanced: lets you connect to multiple computers via a wireless network access point (infrastructure mode) |
SSID Auto Setting | On
Off |
Turns on automatic SSID searching in Quick connection mode; set to Off when connecting to multiple projectors at the same time; set to On when connecting in Quick connection mode with an Android device using iProjection |
SSID | Up 32 alphanumeric characters | Sets the SSID (network name) of the wireless LAN system the projector is connecting to |
Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
Channel | 1ch
6ch 11ch |
In Quick connection mode, selects the frequency band (channel) used by the wireless LAN |
SSID Display | On
Off |
Selects whether to display the SSID on the network standby screen |
DHCP | On
Off |
Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address |
IP Address | — | View or change the projector's IP address |
Subnet Mask | — | View or change the projector's Subnet Mask |
Gateway Address | — | View or change the IP address for the projector's gateway |
IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen |