Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select Network Configuration and press Enter.
  4. Do one of the following:
    • Select the Mail menu and press Enter. Turn on Mail Notification.

      PowerLite Pro G6870/G6970WU



    • Select the Administrator Settings menu and press Enter, then select Mail Notification and press Enter. Turn on Mail Notification.

      PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU



  5. Enter the IP address for the SMTP Server option.
    Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
  6. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
  7. Choose an Address or Email Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses.
    Note: Your e-mail address can be up to 32 alphanumeric characters long.
  8. When you finish selecting settings, select Complete or Setup complete and follow the on-screen instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.