Select the
Administrator Setting menu and press
Enter.
PowerLite Pro
G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU
If
available, select the Priority
Gateway setting for your network.
If your
network environment uses an AMX controller, turn on the
AMX Device Discovery setting to
allow the projector to be detected.
If your
network environment uses a Crestron RoomView controller, turn on
the Crestron RoomView setting to
allow the projector to be detected.
Note: Enabling
Crestron RoomView disables the Epson Message Broadcast feature in
the EasyMP Monitor software.
If your
network environment uses a Control4 or Control4 SDDP controller,
turn on the Control4 SDDP setting to
allow the projector to be detected.
If you
want this projector to receive broadcasted messages over the
network, turn on the Message
Broadcasting setting. Administrators can broadcast messages
over the network using the Message Broadcasting plug-in for EasyMP
Monitor (Windows only).
When you
finish selecting settings, select Complete or Setup
complete and follow the on-screen instructions to save your
settings and exit the menus.