Green |
Off |
Off |
Off |
Normal operation. |
Flashing green |
Off |
Off |
Off |
Warming up. Wait for an image to appear. |
Orange |
Off |
Off |
Off |
Standby or sleep mode. |
Flashing orange |
Off |
Off |
Off |
Preparing network monitoring or shutting down.
(Wait for the light to remain orange before unplugging the
projector.) |
Flashing red |
Off |
Flashing orange |
Off |
Projector is too hot.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
Make sure
the environmental temperature is not too hot.
|
Red |
Off |
Red |
Off |
Projector has overheated and turned off. Leave
it turned off to cool down for five minutes.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Red |
Flashing red |
Off |
Off |
Lamp has a problem.
-
Check to
see if the lamp is burned out, broken, or installed incorrectly.
Reseat or replace the lamp as necessary.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
If
operating the projector at high altitude, turn on High Altitude Mode.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
On |
Off |
Off |
Flashing green |
It is time to clean the air filter. |
On |
Off |
Off |
Flashing orange |
Low air flow through the projector.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
Red |
Off |
Off |
Red |
Low air flow through the air filter.
-
Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
-
Clean or
replace the air filter.
-
If the
problem persists, unplug the projector and contact Epson for
help.
|
On |
Flashing orange |
Off |
Off |
The lamp is past its replacement period and
needs to be replaced to avoid damage. Do not continue using the
projector. |
Red |
Off |
Flashing red |
Off |
A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson for help. |
Red or flashing red |
Flashing red |
Flashing red |
Off |
Internal projector error or air exhaust vent
error. Turn the projector off, unplug it, and contact Epson for
help. |
Light status varies |
Flashing orange rapidly |
Flashing orange rapidly |
Off |
When transferring settings between projectors,
the settings file may be corrupt or the USB flash drive or USB
cable may not be properly connected. Remove the flash drive or
cable, unplug the power cord, and try again. |
Flashing orange rapidly |
Flashing orange rapidly |
Flashing orange rapidly |
Off |
When transferring settings between projectors,
writing may have failed and a projector error may have occurred.
Turn the projector off, unplug it, and contact Epson for help. |