The power light is on |
The product is turned on. |
The power light is flashing |
The product is busy. Wait for the
power light to stop flashing
before turning off the product.
If you just filled the ink, the power light will flash for
approximately 20 minutes. Do not cancel this process. |
The paper light is on |
No paper is loaded or multiple sheets fed at
one time. Load paper in the product, and press the
stop button to clear the
error. |
The paper light is flashing |
Paper is jammed in the product. Remove
the jammed paper, and press the stop button to clear the
error. |
The power light is on
The ink light is on |
Initial ink charging may not be complete. See
the Start Here poster for instructions. |
The paper light is flashing
The ink light is
flashing |
The ink pads need to be replaced. You must
contact Epson for support. |
The power light is flashing
The paper light is flashing
The ink light is
flashing |
Open the printer cover and remove any paper or
protective materials inside the printer. Turn the product off and
then back on again. |
The ink light is on
The paper light is on |
An error has occurred during firmware updating.
Connect your product using a USB cable and try updating the
firmware again. If the error message continues, contact Epson for
support. |