| Printer error 0xXX |
Turn the product off. Make sure no paper is
jammed in the product, then turn the product back on again. If the
error continues, contact Epson for support. |
| A printer's ink pad is nearing the end of its
service life. |
The ink pad is near the end of its service
life. Contact Epson for support. (To continue printing, press one
of the  Iniciar button.) |
| A printer's ink pad is at the end of its
service life. |
The ink pad is at the end of its service life.
Turn off the product and contact Epson for support. |
| Communication error |
Make sure the computer is connected to your
product and your software is installed correctly. |
| Paper jam |
Paper is jammed in the product. Remove the
jammed paper and press the OK button to clear the error. |
| Invalid IP address and subnet mask |
Enter the IP address and subnet mask
correctly. |
| No dial tone |
Make sure the phone cable is connected
correctly and the phone line works. If you connected the product to
a PBX (Private Branch Exchange) phone line or Terminal Adapter,
turn off the Dial Tone
Detection setting. |
| Recovery mode |
An error has occurred during firmware updating.
Connect your product using a USB cable and try updating the
firmware again. If you still receive this error message, contact
Epson for support. |