Aligning the Print Head Using the Product Control Panel

You can align the print head using the control panel on your product.
  1. Make sure there are no errors on the LCD screen, the CD/DVD tray is not inserted for printing, and the output tray is extended.
  2. Load a few sheets of plain paper in the product.
  3. Press the  home button, if necessary.
  4. Select Setup.
  5. Select Maintenance.


  6. Select Print Head Alignment.


  7. Press the  Start button to print an alignment sheet.
    Note: Do not cancel printing while you are printing a head alignment pattern.
  8. Check the printed pattern and select the number representing the best printed pattern for each set.
  9. Select Done when you are finished.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use