Loading a CD/DVD

You can print on any compatible, ink jet-printable CDs or DVDs, including Blu-ray Discs.
Caution:
Do not insert the CD/DVD tray while the product is printing, copying, or performing other operations. Otherwise, your product may be damaged or the surface of the CD/DVD may become dirty or scratched.
Note: If you are using discs where the printable area extends to within 0.16 inch (4 mm) of the center hole, you may need to adjust the inner diameter setting using the control panel or Epson Print CD software.
  1. Burn your files, music, or video onto your disc before printing on it.
  2. Send your file from your computer or from your product's control panel.
  3. When you see a message that the product is preparing for CD loading, follow the instructions to load a CD.
  4. Raise the control panel all the way up.


  5. Make sure nothing is on the output tray, then close it if necessary.


  6. Close the front cover.
  7. Remove the CD/DVD tray from the bottom of the product.


  8. Place a CD or DVD on the CD/DVD tray with the printable side faceup.


  9. Insert the tray into the slot above the output tray as shown.
    Note: Make sure the  marks on the tray and the marks on the product line up.


  10. Select Ready and select OK.
Note: The CD/DVD tray ejects automatically after a certain period of time.
Caution:
Do not turn off the product with a CD or DVD loaded in it. Always remove the disc first.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use