If you have problems with paper jams in the automatic
document feeder (ADF), follow the steps below or on the LCD screen
to clear the jam.
- Cancel the
print job, if necessary.
- Remove your
originals from the ADF.
- Open the ADF
cover, then carefully remove any jammed paper.
Caution:
Make sure you open the ADF cover before
removing any jammed paper. Otherwise the product may be
damaged.
- Leave the
ADF cover open, then raise the scanner unit.
- Press the
tabs and remove the document mat.
- Carefully
remove any jammed paper.
- Reattach the
document mat, lower the scanner unit, and close the ADF cover.
- Open the ADF
input tray as shown.
- Carefully
remove any jammed paper from beneath the ADF input tray.
- Close the
ADF input tray.
- Reload your
originals.
Caution:
Do not load the ADF beyond its capacity
for your paper size. Also make sure your originals are not bent,
folded, or curled and do not have tape, staples, or other materials
that could obstruct the feeder.
- Follow the
prompts on the LCD screen to clear any error messages. If you still
see a paper jam message, check the other paper jam solutions.