Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality.
  1. Connect the HDMI cable to your video source's HDMI output port.
  2. Connect the other end to the projector's HDMI port.

    PowerLite Home Cinema 640/740HD



    PowerLite Home Cinema 1040



Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker.
Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instructions.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use