(E-01) |
A printer error has occurred. Turn the product
off and then back on again. If the error continues, check for a
paper jam. If there is no paper jam, contact Epson for
support. |
(E-02) |
A scanner error has occurred. Turn the product
off and then back on again. |
(E-11) |
The ink pad needs to be replaced. Contact Epson
for support. |
(W-01) |
Paper is jammed in the product. Remove the
jammed paper, then press the button indicated on the LCD screen to
clear the error. If the error continues, turn the product off and
back on again. |
(W-11) |
An ink pad is nearing the end of its service
life. Contact Epson for support. (To continue printing, press the
start button.) |
(I-22) |
To establish a wireless connection using an
access point, press the button on the access point or click the
button on the access point's wireless settings screen displayed on
your computer screen. |
(I-23) |
Enter the PIN code displayed on the LCD screen
into the access point or computer within two minutes. If you wait
longer than two minutes, a time-out error occurs, the code changes,
and you must enter a new code. |
(I-31) |
To make wireless connection settings from your
computer, run the installer and follow the on-screen
instructions. |
(I-41) |
The Paper Configuration option is disabled. You
must enable Paper Configuration to use AirPrint. |
(I-60) |
Your computer may not support WSD (Web Services
for Devices). The Scan to PC (WSD) function is available only for
computers running English versions of Windows 8, Windows 7, or
Windows Vista. |
Recovery Mode |
A firmware update has failed. Connect your
product using a USB cable and try updating the firmware again. If
you still receive this error message, contact Epson for
support. |