If EpsonNet Setup cannot find your product on a network, try
these solutions:
Make sure
your product is turned on and connected to your network. Verify
connection using your product control panel.
Check if
your network name (SSID) contains non-ASCII characters. Your
product cannot display non-ASCII characters.
Make sure
your product is not connected to a guest network.
If
necessary, reinstall your product software and try running EpsonNet
Setup again:
Reset your
product's network settings to their factory defaults.
Windows
only: uninstall your product software.
Initialize
your router following the instructions in your router
documentation.
Note: If you are
reading these instructions online, you will lose your Internet
connection when you initialize your router, so note the next step
before initializing it.
Download
your product software from the Epson website using the instructions
on the Start Here sheet.
If you have
replaced your router, reinstall your product software to connect to
the new router.
Note: If you are
using a 5 GHz wireless router, set the router to operate in dual
band (2.4 GHz and 5 GHz) mode. See your router documentation
for instructions.