If your product does not appear in the OS X printer
window, try these solutions:
- Turn your
product off, wait 30 seconds, then turn it back on again.
- If you are
connecting the product wirelessly via EpsonNet Setup and a WiFi
symbol is not displayed on the product's LCD screen, make sure your
product software was installed correctly. If necessary, reinstall
your software.
- Make sure
you installed your product software correctly for your network. See
the Start Here sheet for instructions.
- If your Mac
includes both wired and wireless network services, make sure the
network to which you connected your product is at the top of the
Set Service Order list. Check your Mac documentation for
instructions.
Note: If you
are using a 5 GHz wireless router, set the router to operate in
dual band (2.4 GHz and 5 GHz) mode. If your router uses a
single network name (SSID) for both the 2.4 GHz and 5 GHz
band, give each band its own network name (SSID) instead, such as
Home Network 2.4 GHz and Home Network 5 GHz. See your
router documentation or contact your internet service provider for
instructions.