Use the rear
manual feed guide to load fine art media.
Note: You can
load fine art media with a thickness of 0.012 to 0.028 inch (0.3 to
0.7 mm).
Turn on your product.
Remove any paper from the sheet feeder and close the paper
support.
Remove any roll paper and the roll paper
holders.
Slide the rear roll paper edge guide all the way to the
right.
Align the arrows on the rear manual feed guide with the
arrows on the back of the product and hook the feed guide on the
rail.
Open the front cover.
Open the output
tray.
Insert a single sheet of fine art paper into the rear
manual feed guide, short edge first and printable side up. Slide
the edge guide to the edge of the paper.
Feed the paper until it stops and hold it there for about
three seconds. The product feeds the paper
automatically.
Always follow these paper loading guidelines:
Load only one
sheet at a time.
Load fine art
media short edge first, no matter which way your document
faces.
Load the
printable side face up.
Check the paper
package for any additional loading instructions.
Note: If you
need to eject the paper from the rear of the printer without
printing, press the roll paper button for three
seconds. Remove the paper and press the roll paper button again to clear
the flashing paper/cancel
light