Image Quality Settings - Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source and resolution. (If a menu is grayed-out, that item is not available for the input source you are currently using.)



To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description
Color Mode See the list of available Color Modes Adjusts the vividness of image colors for various image types and environments
Brightness Varying levels available Lightens or darkens the overall image
Contrast Varying levels available Adjusts the difference between light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the image colors
Tint Varying levels available Adjusts the balance of green to magenta tones in the image
Sharpness Varying levels available Adjusts the sharpness or softness of image details
Color Temp. (color temperature) Varying levels available Sets the overall color tone; Higher values tint the image blue and lower values tint the image red
Frame Interpolation Off

Weak

Normal

Strong

Smooths fast moving video by comparing consecutive frames and inserting an intermediate frame between them
Image Enhancement Image Preset Mode

Noise Reduction

MPEG Noise Reduction

Detail Enhancement

Image Preset Mode: Selects the image enhancement settings saved in advance

Noise Reduction: Reduces flickering in analog images in two levels (cannot be set if Image Processing is set to Fast)

MPEG Noise Reduction: Reduces the noise or artifacts seen in MPEG video

Detail Enhancement: Enhances details to create clear outlines

Advanced RGBCMY

Epson Super White

RGBCMY: Adjusts the hue, saturation, and brightness for each color

Epson Super White: Reduces over-exposure of whites in your image; is only available when receiving signal input from the HDMI1 or HDMI2 port.

Power Consumption Normal

ECO

Adjusts the brightness level, power usage, and fan noise
Auto Iris Off

Normal

High Speed

Adjusts the projected luminance based on the image brightness when certain Color Modes are selected
Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting.