Moving the Print Head for Maintenance

Certain maintenance tasks require that you move the print head as described here before performing the task.
Caution:
Always move the print head as described here. Do not move the print head manually or you may cause your product to malfunction.
  1. When the product is turned on, press the  maintenance button on the control panel. You see the Maintenance menu.
  2. Press the up or down arrow buttons on the control panel to select Head Maintenance and press the OK button. The print head moves into maintenance position.
  3. Perform your maintenance task as necessary.
    Note: After 10 minutes, a alarm sounds to warning you that the print head is still in maintenance position. You also see a notice on the LCD screen telling you to clean the print heads after maintenance. After completing your maintenance task, press the OK button to clean the print heads. The alarm sounds again at 10 minute intervals if the print heads are not in the home position.
Parent topic: Preparing for Maintenance