Setting | Options | Description |
---|---|---|
Side Margin(Right) | 0.12 to 1.00 inch (3 to 25 mm) | Selects the width of the right margin. |
Side Margin(Left) | 0.12 to 1.00 inch (3 to 25 mm) | Selects the width of the left margin. |
Print Start Position | 0.00 to 32.00 inches (0 to 800 mm) | Sets an additional margin on the right side of the media. |
Margin Between Pages | Normal
No Margin/–10 mm to +10 mm |
Sets a margin between pages. |
Media Size Check | On
Off |
Automatically detects the edges of the media.
Leave this setting On unless the
printer displays a Media Size Error
when media is loaded correctly.
Changes to the settings are applied after the media is reloaded. |
Media End Check | On
Off |
Automatically detects the end of the media. Leave this setting On unless the printer displays Media Out when media is loaded correctly. |
Media Skew Check | On
Off |
Stops printing and displays an error when skewed media is detected. Leave this setting On to avoid jams caused by skewed media. |
Media End Option | Continue
Stop Printing |
Selects whether to continue an unfinished print job after a roll is replaced. |
Print Nozzle Pattern | Off
1 to 10 pages |
Selects how often to print an automatic nozzle check pattern. |
Periodical
Cleaning
Light Medium Heavy |
Off
1 to 240 hours |
Selects the frequency and strength of automatic head cleaning cycles. Even when Off is selected, the printer will automatically clean the print head at a fixed interval after printing to keep the nozzles from clogging. |
Cleaning Cycle | Off
1 to 10 pages |
Selects the frequency of automatic head cleaning cycles. |
Heat Off Timer | 15 to 240 minutes | Selects the interval before the heater turns off automatically and the printer enters sleep mode. In sleep mode, the control panel also turns off and other components consume less power. |
Restore Settings | Yes
No |
Returns all items in the Printer Setup menu to their default settings. |