Loading a CD/DVD

You can print on any compatible, ink jet-printable CDs or DVDs, including Blu-ray Discs.
Caution:
Do not turn the product off or on with the CD/DVD tray inserted. Do not insert the CD/DVD tray while the product is printing or performing other operations. Otherwise, your product may be damaged or the surface of the CD/DVD may become dirty or scratched.
Note: If you are using discs where the printable area extends to within 0.16 inch (4 mm) of the center hole, you may need to adjust the inner diameter setting using the control panel or Epson Print CD software.
  1. Burn your files, music, or video onto your disc before printing on it.
  2. Make sure the product is turned on.
  3. Open the front cover.
  4. Lift up the output tray and pull it to remove it from your product.


  5. Insert the output tray into the slot labeled CD/DVD at an angle, as shown.


  6. Place a CD or DVD on the CD/DVD tray with the printable side faceup.


    Note: For small 8-cm discs, place the adapter on the tray and then place the disc in the adapter.


  7. Gently insert the CD/DVD tray into the CD/DVD feed tray. Push in the tray until the arrows on the tray and the feed tray are aligned.


    Caution:
    Do not insert the CD/DVD tray while the product is printing. Do not insert the CD/DVD tray while the product is printing or performing other operations. Otherwise, your product may be damaged or the surface of the CD/DVD may become dirty or scratched.
Parent topic: Printing on CDs/DVDs