You can configure these IEEE 802.1X network settings in Web Config.
Setting | Options/Description |
---|---|
Connection Method | Displays the current network connection method |
EAP Type | Select one of these authentication methods for
connections between the product and a RADIUS server:
EAP-TLS or PEAP-TLS: You must obtain and import a CA-signed certificate PEAP/MSCHAPv2: You must configure a password |
User ID | Enter an ID between 1 and 128 ASCII characters for authentication on a RADIUS server |
Password | Enter a password between 1 and 128 ASCII characters for authentication of the product. If you are using Windows as a RADIUS server, enter up to 127 ASCII characters. |
Confirm Password | Enter the authentication password again |
Server ID | Enter a server ID between 1 and 128 ASCII characters for authentication on a specified RADIUS server; server ID is verified in the subject/subjectAltName field of a server certificate sent from the RADIUS server |
Certificate Validation | Select a valid certificate regardless of the authentication method; import the certificate using the CA Certificates. |
Anonymous Name | If you selected PEAP-TLS or PEAP/MSCHAPv2 as the Authentication Method setting, you can configure an anonymous name between 1 and 128 ASCII characters instead of a user ID for phase 1 of a PEAP authentication |
Encryption Strength | Select one of the following encryption strengths:
High for AES256/3DES Middle for AES256/3DES/AES128/RC4 |