You can save
the projector settings you want to transfer to a USB flash drive.
Note: Use an
empty flash drive. If the drive contains other files, the transfer
may not complete correctly.
Note: The
flash drive must use the FAT format and cannot have any security
features.
- Turn off the projector and unplug the
power cord from the projector's power inlet.
- Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly.
- Press and hold the Esc button on the control panel or remote
control as you connect the power cord to the projector's power
inlet.
- When the power, Status, Lamp, and Temp
lights turn on, release the Esc
button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the power light turns blue and the projector enters standby mode.Caution:Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector. - Once the projector enters standby mode, remove the flash drive.
